Country
Cart

The cart is empty.

Empty cart Open cart
Show all

EN 577.9 Multi-Lobed Handwheels Plastic, for Position Indicators EN 000.9 / EN 000.13

Multi-Lobed Handwheels EN 577.9: Plastic, for Position Indicators EN 000.9 / EN 000.13
Original design
code: VHT.85-PXX1 / VHT.110-PXX2
More Information on Position Indicators EN 000.13 More Information on Position Indicators EN 000.9 Function Principles and Applications of Position Indicators ISO Fundamental Tolerances Plastic Characteristics

Product description

These multi-lobed handwheels EN 577.9 have a recess in the hub to accept position indicators EN 000.9 or EN 000.13.

The screw is screwed into the pallet pin and secured into position with the hex lock nut. The pallet depth can still be adjusted to a certain extent.

If application requires occasional removal of position indicator, handwheel may be ordered upon request with a cover cap to shroud the empty recess.

Specification

Body
Plastic, Polyamide (PA)

  • Glass fiber reinforced
  • Operating temperature
    32 °F to 212 °F (0 °C to +100 °C)
  • Black, matte finish

Bushing / Pallet pin
Steel, blackened finish

Screw for pallet pin
Injected

Set screw
Stainless steel

RoHS

Accessory

EN 000.9 Position Indicators (Positive Drive, with Analog Display)
EN 000.13 Position Indicators (Positive Drive, with Digital / Analog Display)
EN 576 Cover Disks (for Control Knobs / Handwheels without Position Indicator )
GN 826 Control Knob Flanges (for Adjustable Spindles)

EN 577.9 Plastic Multi-Lobed Handwheels, for Position Indicators EN 000.9 / EN 000.13 sketch
Hide technical drawing
EN 577.9 Plastic Multi-Lobed Handwheels, for Position Indicators EN 000.9 / EN 000.13 sketch

Part Options / Table
Show / Hide columns

Metric

d1d2 H7
Bore		d3d4d5 -0.004abl1l2l3l4l5For position indicators
EN 000.9
Size
EN 000.13
Size
3.35B 100.712.280.2360.750.730.812.170.200.410.571.65-
4.33B 121.183.030.2361.120.790.872.280.240.470.512.362.36

Build & Price
Outside diameter d1
Bore d2
Outside diameter d1
Bore d2

Installation Instructions

  1. Turn spindle into the starting position (0 position).

  2. Set the length of the pallet pin and lock in place with hex nut. Make sure that the pin does not sit on the drill hole base after mounting the handwheel.

  3. Move the position indicator to the 0 position by turning the outer gear wheel.

  4. Hold the (unmounted) handwheel such that the hole for the gear pinion is in the “12 o‘clock“ position and turn the crown wheel until the pallet pin is in the recess bore at the machine body.

  5. Carefully insert the position indicator into the hand knob, making sure that the gear pinion engages in the crown wheel. The crown wheel may need to be readjusted slightly during this step. Secure the position indicator with the set screw, avoiding excessive tightening torque to prevent the housing from deforming.

  6. Place the handwheel onto the spindle and fix in place with the set screw.

7.Check by turning the handwheel to ensure that the starting position of the spindle and the 0 position of both pointers coincide.

If necessary, take out and readjust the position indicator.

Selected Part

Total (net)
Mex$988.90
Available within 2 weeks
Create Project List
Save as Favorites
Recommend a product
Please note our quantity discounts (Mexican Pesos).
MinMaxPrice
16Mex$988.90
799Mex$952.94
100249Mex$899.00
≥ 250Mex$809.10
Prop 65: Not compliant
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
RoHS: Compliant
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Weight: 0.286 lbs
If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021

CAD Download

Other Data Formats

Email CAD File

To receive an email with a CAD download without creating an account, please enter your e-mail address. Max of 3 CAD files per day unless you create an account.

CAD Download Tutorial About CAD Downloads

Need Help?

Our service team is available from Monday to Friday between 8:00 AM and 6:00 PM Central Time: +52(81)2721-4021

Special Requests | Contact our sales team

EN 577.9-85-B10EN 577.9-110-B12

Your Contact

You are looking for a Winco partner near you?

JW Winco Services

Our service team is available from Monday to Friday between 8:00 AM and 6:00 PM Central Time

+52(81)2721-4021 ventas@jwwinco.mx
Request Callback