GN 584 D-Shackles Heat-Treated Steel, Straight Version

D-Shackles GN 584: Heat-Treated Steel, Straight Version

Type: A - With threaded pin

Product description

High-strength, straight D-shackles GN 584 are manufactured in accordance with US Federal Specification RR-C-271, and are characterized by a six-fold safety. This means that the minimum breaking force is at least six times higher than the value of the nominal load (WLL).

The nominal size and the nominal load (WLL) are forged into the shackle, which makes it easier to securely identify the lifting gear. The nominal load must not be exceeded.

Type B with bolt, nut, and cotter pin is recommended for permanent connections. The pin can rotate, and the bolt and nut are secured with the cotter pin to eliminate loosening.

Specification

Ring bracket
Steel

Heat-Treated
Die-forged
Hot-dip galvanised

Pin
Steel

Heat-Treated
Die-forged
Galvanic zinc plated, lacquered

RoHS

GN 584 Heat-Treated Steel D-Shackles, Straight Version sketch

Hide technical drawing

Part Options / Table

Type

A	With threaded pin
B	With bolt, nut, and cotter pin

Part Number A - With threaded pin	Part Number B - With bolt, nut, and cotter pin	d₁ Millimeters (Nominal size)	Inches	b ±0.118	d₂ min.	d₃ *	d₄ max.	h	Nominal load (WLL) in metric tons


584-6-A	584-6-B	0.24	1/4	0.472 ±0.118	0.31	5/16 x 18	0.87	0.87	0.50 t [5.0 kN]
584-8-A	584-8-B	0.31	5/16	0.512 ±0.118	0.37	3/8 x 16	1.00	1.02	0.75 t [7.5 kN]
584-10-A	584-10-B	0.39	3/8	0.630 ±0.118	0.43	7/16 x 14	1.12	1.22	1.00 t [10.0 kN]
584-11-A	584-11-B	0.43	7/16	0.709 ±0.118	0.49	1/2 x 13	1.24	1.42	1.50 t [15.0 kN]
584-13-A	584-13-B	0.51	1/2	0.827 ±0.118	0.61	5/8 x 11	1.38	1.61	2.00 t [20.0 kN]
584-16-A	584-16-B	0.63	5/8	1.063 ±0.118	0.75	3/4 x 10	1.87	2.01	3.25 t [32.5 kN]
584-19-A	584-19-B	0.75	3/4	1.260 ±0.118	0.87	7/8 x 9	2.13	2.36	4.75 t [47.5 kN]
584-22-A	584-22-B	0.87	7/8	1.417 ±0.118	0.98	1 x 8	2.36	2.80	6.50 t [65.0 kN]
584-25-A	584-25-B	0.98	1	1.693 ±0.118	1.12	1 1/8 x 7	2.62	3.19	8.50 t [85.0 kN]

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

d₁ Millimeters (Nominal size)	Inches	b ±0.118	d₂ min.	d₃ *	d₄ max.	h	Nominal load (WLL) in metric tons

0.24	1/4	0.472	0.31	5/16 x 18	0.87	0.87	0.50 t [5.0 kN]
0.31	5/16	0.512	0.37	3/8 x 16	1.00	1.02	0.75 t [7.5 kN]
0.39	3/8	0.630	0.43	7/16 x 14	1.12	1.22	1.00 t [10.0 kN]
0.43	7/16	0.709	0.49	1/2 x 13	1.24	1.42	1.50 t [15.0 kN]
0.51	1/2	0.827	0.61	5/8 x 11	1.38	1.61	2.00 t [20.0 kN]
0.63	5/8	1.063	0.75	3/4 x 10	1.87	2.01	3.25 t [32.5 kN]
0.75	3/4	1.260	0.87	7/8 x 9	2.13	2.36	4.75 t [47.5 kN]
0.87	7/8	1.417	0.98	1 x 8	2.36	2.80	6.50 t [65.0 kN]
0.98	1	1.693	1.12	1 1/8 x 7	2.62	3.19	8.50 t [85.0 kN]

* Pins and bolts are threaded as specified; however, variances are possible.

Build & Price

Security Information

The information in the operating instruction must be observed during installation, initial operation, and use. It is enclosed with the product and is provided digitally on the product page at jwwinco.com

Selected Part

Part Number

Total (net)

Mex$114.00

Available within 2 weeks

Quantity

Create Project List

Save as Favorites

Please note our quantity discounts (Mexican Pesos).

Min	Max	Price
1	4	Mex$114.00
5	9	Mex$104.50
10	24	Mex$95.00
≥ 25		Mex$85.50

Prop 65: -

Please contact our Sales Department for more information.

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.099 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021