Breather Valves GN 883

Type: A - Low design

Standard Sheet GN 883 Print This Page Stainless Steel Characteristics

Product description

Once the opening pressure specified in the table is exceeded, breather valves GN 883 will vent a container, preventing excessive internal container pressure. They are also characterized by their compact dimensions.

An identification (type A) or a colored ring (type B) in yellow (20 - 80 mbar) or green (160 - 240 mbar) indicates the different opening pressures.

The simple operating principle (thrust spring / ball) guarantees a stable and trouble-free use of the valve. The installation position is vertically upwards.

Assembly note:
For wall thicknesses below 4 mm, use thin hex nuts GN 7430.

Specification

Body
BrassMS

Ball
Steel 1.3505

Thrust spring
Stainless steel AISI 301

Seal DIN 7603 A
Soft iron 1.0338
(for d₁ = M10x1: PA6)

Breather cap (Type B)
Stainless steel AISI 304

Temperature resistant from
-22 °F to +392 °F (-30 °C to +200 °C)

RoHS

Accessory

Thin Hex Nuts GN 7430

Selected Part

Part Number A - Low design	Part Number B - High design, with stainless steel cap	d₁ Fine thread	Pipe thread	Opening pressure in mbar min.	max.	d₂	d₃	e₁	e₂	l₁	l₂	l₃	l₄	l₅	A/F Type A	Type B	Approx. air outlet l/min. Type A	Type B


883-M10X1-20-A-MS	883-M10X1-20-B-MS	M 10 x 1	-	20	80	0.57	0.49	0.63	0.73	0.24	0.24	0.31	0.28	0.63	0.55	0.67	1.2	1.8
883-M10X1-160-A-MS	883-M10X1-160-B-MS	M 10 x 1	-	160	240	0.57	0.49	0.63	0.73	0.24	0.24	0.31	0.28	0.63	0.55	0.67	1.2	1.8
883-M12X1.5-20-A-MS	883-M12X1.5-20-B-MS	M 12 x 1.5	-	20	80	0.71	0.49	0.77	0.73	0.26	0.24	0.30	0.28	0.65	0.67	0.67	1.2	1.8
883-M12X1.5-160-A-MS	883-M12X1.5-160-B-MS	M 12 x 1.5	-	160	240	0.71	0.49	0.77	0.73	0.26	0.24	0.30	0.28	0.65	0.67	0.67	1.2	1.8
883-G1/4-20-A-MS	883-G1/4-20-B-MS	-	G 1/4	20	80	0.79	0.49	0.77	0.73	0.26	0.24	0.30	0.30	0.65	0.67	0.67	1.2	1.8
883-M14X1.5-20-A-MS	883-M14X1.5-20-B-MS	M 14 x 1.5	-	20	80	0.79	0.49	0.77	0.73	0.26	0.24	0.30	0.30	0.65	0.67	0.67	1.2	1.8
883-G1/4-160-A-MS	883-G1/4-160-B-MS	-	G 1/4	160	240	0.79	0.49	0.77	0.73	0.26	0.24	0.30	0.30	0.65	0.67	0.67	1.2	1.8
883-M14X1.5-160-A-MS	883-M14X1.5-160-B-MS	M 14 x 1.5	-	160	240	0.79	0.49	0.77	0.73	0.26	0.24	0.30	0.30	0.65	0.67	0.67	1.2	1.8
883-M16X1.5-20-A-MS	883-M16X1.5-20-B-MS	M 16 x 1.5	-	20	80	0.87	0.49	0.98	0.94	0.35	0.43	0.30	0.30	0.65	0.87	0.87	1.2	1.8
883-M16X1.5-160-A-MS	883-M16X1.5-160-B-MS	M 16 x 1.5	-	160	240	0.87	0.49	0.98	0.94	0.35	0.43	0.30	0.30	0.65	0.87	0.87	1.2	1.8
883-G3/8-20-A-MS	883-G3/8-20-B-MS	-	G 3/8	20	80	0.91	0.49	0.98	0.94	0.35	0.43	0.30	0.30	0.65	0.87	0.87	1.2	1.8
883-G3/8-160-A-MS	883-G3/8-160-B-MS	-	G 3/8	160	240	0.91	0.49	0.98	0.94	0.35	0.43	0.30	0.30	0.65	0.87	0.87	1.2	1.8
883-G1/2-20-A-MS	883-G1/2-20-B-MS	-	G 1/2	20	80	1.02	0.49	1.22	1.14	0.33	0.43	0.31	0.31	0.67	1.06	1.06	1.2	1.8
883-G1/2-160-A-MS	883-G1/2-160-B-MS	-	G 1/2	160	240	1.02	0.49	1.22	1.14	0.33	0.43	0.31	0.31	0.67	1.06	1.06	1.2	1.8
883-G3/4-20-A-MS	883-G3/4-20-B-MS	-	G 3/4	20	80	1.26	0.49	1.46	1.38	0.33	0.43	0.31	0.31	0.67	1.26	1.26	1.2	1.8
883-G3/4-160-A-MS	883-G3/4-160-B-MS	-	G 3/4	160	240	1.26	0.49	1.46	1.38	0.33	0.43	0.31	0.31	0.67	1.26	1.26	1.2	1.8

d₁ Fine thread	Pipe thread	Opening pressure in mbar min.	max.	d₂	d₃	e₁	e₂	l₁	l₂	l₃	l₄	l₅	A/F Type A	Type B	Approx. air outlet l/min. Type A	Type B

M 10 x 1	-	20	80	0.57	0.49	0.63	0.73	0.24	0.24	0.31	0.28	0.63	0.55	0.67	1.2	1.8
M 10 x 1	-	160	240	0.57	0.49	0.63	0.73	0.24	0.24	0.31	0.28	0.63	0.55	0.67	1.2	1.8
M 12 x 1.5	-	20	80	0.71	0.49	0.77	0.73	0.26	0.24	0.30	0.28	0.65	0.67	0.67	1.2	1.8
M 12 x 1.5	-	160	240	0.71	0.49	0.77	0.73	0.26	0.24	0.30	0.28	0.65	0.67	0.67	1.2	1.8
M 14 x 1.5	G 1/4	20	80	0.79	0.49	0.77	0.73	0.26	0.24	0.30	0.30	0.65	0.67	0.67	1.2	1.8
M 14 x 1.5	G 1/4	160	240	0.79	0.49	0.77	0.73	0.26	0.24	0.30	0.30	0.65	0.67	0.67	1.2	1.8
M 16 x 1.5	-	20	80	0.87	0.49	0.98	0.94	0.35	0.43	0.30	0.30	0.65	0.87	0.87	1.2	1.8
M 16 x 1.5	-	160	240	0.87	0.49	0.98	0.94	0.35	0.43	0.30	0.30	0.65	0.87	0.87	1.2	1.8
-	G 3/8	20	80	0.91	0.49	0.98	0.94	0.35	0.43	0.30	0.30	0.65	0.87	0.87	1.2	1.8
-	G 3/8	160	240	0.91	0.49	0.98	0.94	0.35	0.43	0.30	0.30	0.65	0.87	0.87	1.2	1.8
-	G 1/2	20	80	1.02	0.49	1.22	1.14	0.33	0.43	0.31	0.31	0.67	1.06	1.06	1.2	1.8
-	G 1/2	160	240	1.02	0.49	1.22	1.14	0.33	0.43	0.31	0.31	0.67	1.06	1.06	1.2	1.8
-	G 3/4	20	80	1.26	0.49	1.46	1.38	0.33	0.43	0.31	0.31	0.67	1.26	1.26	1.2	1.8
-	G 3/4	160	240	1.26	0.49	1.46	1.38	0.33	0.43	0.31	0.31	0.67	1.26	1.26	1.2	1.8

Part Number

Total (net)

Mex$197.40

Available within 2 weeks

Quantity

Create Project List

Save as Favorites

Please note our quantity discounts (Mexican Pesos).

Min	Max	Price
1	49	Mex$276.36
50	99	Mex$253.33
100	249	Mex$230.30
≥ 250		Mex$207.27

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.017 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021