Press-Fit Side Thrust Pins GN 715

Type: SB - Steel thrust pin, with seal

Standard Sheet GN 715 Print This Page ISO Fundamental Tolerances Plastic Characteristics

Product description

Press-fit side thrust pins GN 715 are versatile and practical elements for holding, positioning and clamping of workpieces.

They eliminate costly alternatives, are space saving and easy to install. The knurled body requires only a hole tolerance of H8.

Version with seal used in applications involving a fluid or liquid.

For easy insertion a suitable installation tool GN 715.1 is available (see table).

Specification

Housing
Aluminum, plain finish

Thrust pin

Steel (Type SA / SB)
- Hardedned
- Zinc plated, blue passivated finish
Plastic, polyacetal (POM) (Type KA / KB)

Thrust spring

Side thrust force light
Stainless steel AISI 301
Side thrust force medium
Spring steel, blackened finish
Side thrust force heavy
Spring steel, zinc plated, blue passivated finish

Seal
Chloroprene rubber (CR)

RoHS

Accessory

Eccentric Bushings GN 715.2
Installation Tools GN 715.1

GN 715 Aluminum Press-Fit Side Thrust Pins sketch

Hide technical drawing

Part Options / Table

Type

SA	Steel thrust pin, without seal
KA	Plastic thrust pin, without seal
SB	Steel thrust pin, with seal
KB	Plastic thrust pin, with seal

Part Number SA - Steel thrust pin, without seal	Part Number KA - Plastic thrust pin, without seal	Part Number SB - Steel thrust pin, with seal	Part Number KB - Plastic thrust pin, with seal	d₁	Side thrust force F Type SA / SB	Type KA / KB	d₂	l₁ -0.04 Type SA / KA	l₁ -0.08 Type SB / KB	l₂ ±0.02 Type SA / KA	Type SB / KB	l₃ ±0.02 Type SA / KA	Type SB / KB	w	Part number installation tool


715-3-1/4-10-SA				0.12	2.25 lbf (10 N)	-	1/4	0.28 -0.04	-	0.16 ±0.02	-	0.10 ±0.02	-	0.02	715.1-3
	715-3-1/4-10-KA			0.12	-	2.25 lbf (10 N)	1/4	0.28 -0.04	-	0.16 ±0.02	-	0.10 ±0.02	-	0.02	715.1-3
		715-3-1/4-10-SB		0.12	2.25 lbf (10 N)	-	1/4	-	0.30 -0.08	-	0.16	-	0.10	0.02	715.1-3
			715-3-1/4-10-KB	0.12	-	2.25 lbf (10 N)	1/4	-	0.30 -0.08	-	0.16	-	0.10	0.02	715.1-3
715-3-1/4-20-SA				0.12	4.50 lbf (20 N)	-	1/4	0.28 -0.04	-	0.16 ±0.02	-	0.10 ±0.02	-	0.02	715.1-3
		715-3-1/4-20-SB		0.12	4.50 lbf (20 N)	-	1/4	-	0.30 -0.08	-	0.16	-	0.10	0.02	715.1-3
715-3-1/4-40-SA				0.12	8.99 lbf (40 N)	-	1/4	0.28 -0.04	-	0.16 ±0.02	-	0.10 ±0.02	-	0.02	715.1-3
		715-3-1/4-40-SB		0.12	8.99 lbf (40 N)	-	1/4	-	0.30 -0.08	-	0.16	-	0.10	0.02	715.1-3
715-5-7/16-20-SA				0.20	4.50 lbf (20 N)	-	7/16	0.43 -0.04	-	0.26 ±0.02	-	0.17 ±0.02	-	0.03	715.1-5.6
	715-5-7/16-20-KA			0.20	-	4.50 lbf (20 N)	7/16	0.43 -0.04	-	0.26 ±0.02	-	0.17 ±0.02	-	0.03	715.1-5.6
		715-5-7/16-20-SB		0.20	4.50 lbf (20 N)	-	7/16	-	0.47 -0.08	-	0.25	-	0.15	0.03	715.1-5.6
			715-5-7/16-20-KB	0.20	-	4.50 lbf (20 N)	7/16	-	0.47 -0.08	-	0.25	-	0.15	0.03	715.1-5.6
715-5-7/16-50-SA				0.20	11.24 lbf (50 N)	-	7/16	0.43 -0.04	-	0.26 ±0.02	-	0.17 ±0.02	-	0.03	715.1-5.6
		715-5-7/16-50-SB		0.20	11.24 lbf (50 N)	-	7/16	-	0.47 -0.08	-	0.25	-	0.15	0.03	715.1-5.6
715-5-7/16-100-SA				0.20	22.48 lbf (100 N)	-	7/16	0.43 -0.04	-	0.26 ±0.02	-	0.17 ±0.02	-	0.03	715.1-5.6
		715-5-7/16-100-SB		0.20	22.48 lbf (100 N)	-	7/16	-	0.47 -0.08	-	0.25	-	0.15	0.03	715.1-5.6
715-6-7/16-40-SA				0.24	8.99 lbf (40 N)	-	7/16	0.43 -0.04	-	0.42 ±0.02	-	0.30 ±0.02	-	0.04	715.1-5.6
	715-6-7/16-40-KA			0.24	-	8.99 lbf (40 N)	7/16	0.43 -0.04	-	0.42 ±0.02	-	0.30 ±0.02	-	0.04	715.1-5.6
		715-6-7/16-40-SB		0.24	8.99 lbf (40 N)	-	7/16	-	0.47 -0.08	-	0.41	-	0.29	0.04	715.1-5.6
			715-6-7/16-40-KB	0.24	-	8.99 lbf (40 N)	7/16	-	0.47 -0.08	-	0.41	-	0.29	0.04	715.1-5.6
715-6-7/16-75-SA				0.24	16.86 lbf (75 N)	-	7/16	0.43 -0.04	-	0.42 ±0.02	-	0.30 ±0.02	-	0.04	715.1-5.6
		715-6-7/16-75-SB		0.24	16.86 lbf (75 N)	-	7/16	-	0.47 -0.08	-	0.41	-	0.29	0.04	715.1-5.6
715-6-7/16-100-SA				0.24	22.48 lbf (100 N)	-	7/16	0.43 -0.04	-	0.42 ±0.02	-	0.30 ±0.02	-	0.04	715.1-5.6
		715-6-7/16-100-SB		0.24	22.48 lbf (100 N)	-	7/16	-	0.47 -0.08	-	0.41	-	0.29	0.04	715.1-5.6
715-8-1/2-50-SA				0.31	11.24 lbf (50 N)	-	1/2	0.53 -0.04	-	0.54 ±0.02	-	0.38 ±0.02	-	0.05	715.1-8
	715-8-1/2-50-KA			0.31	-	11.24 lbf (50 N)	1/2	0.53 -0.04	-	0.54 ±0.02	-	0.38 ±0.02	-	0.05	715.1-8
		715-8-1/2-50-SB		0.31	11.24 lbf (50 N)	-	1/2	-	0.57 -0.08	-	0.52	-	0.36	0.05	715.1-8
			715-8-1/2-50-KB	0.31	-	11.24 lbf (50 N)	1/2	-	0.57 -0.08	-	0.52	-	0.36	0.05	715.1-8
715-8-1/2-100-SA				0.31	22.48 lbf (100 N)	-	1/2	0.53 -0.04	-	0.54 ±0.02	-	0.38 ±0.02	-	0.05	715.1-8
		715-8-1/2-100-SB		0.31	22.48 lbf (100 N)	-	1/2	-	0.57 -0.08	-	0.52	-	0.36	0.05	715.1-8
715-8-1/2-150-SA				0.31	33.72 lbf (150 N)	-	1/2	0.53 -0.04	-	0.54 ±0.02	-	0.38 ±0.02	-	0.05	715.1-8
		715-8-1/2-150-SB		0.31	33.72 lbf (150 N)	-	1/2	-	0.57 -0.08	-	0.52	-	0.36	0.05	715.1-8
715-10-5/8-100-SA				0.39	22.48 lbf (100 N)	-	5/8	0.71 -0.04	-	0.66 ±0.02	-	0.46 ±0.02	-	0.06	715.1-10
	715-10-5/8-100-KA			0.39	-	22.48 lbf (100 N)	5/8	0.71 -0.04	-	0.66 ±0.02	-	0.46 ±0.02	-	0.06	715.1-10
		715-10-5/8-100-SB		0.39	22.48 lbf (100 N)	-	5/8	-	0.73 -0.08	-	0.65	-	0.45	0.06	715.1-10
			715-10-5/8-100-KB	0.39	-	22.48 lbf (100 N)	5/8	-	0.73 -0.08	-	0.65	-	0.45	0.06	715.1-10
715-10-5/8-150-SA				0.39	33.72 lbf (150 N)	-	5/8	0.71 -0.04	-	0.66 ±0.02	-	0.46 ±0.02	-	0.06	715.1-10
		715-10-5/8-150-SB		0.39	33.72 lbf (150 N)	-	5/8	-	0.73 -0.08	-	0.65	-	0.45	0.06	715.1-10
715-10-5/8-205-SA				0.39	46.09 lbf (205 N)	-	5/8	0.71 -0.04	-	0.66 ±0.02	-	0.46 ±0.02	-	0.06	715.1-10
		715-10-5/8-205-SB		0.39	46.09 lbf (205 N)	-	5/8	-	0.73 -0.08	-	0.65	-	0.45	0.06	715.1-10
715-3-6-10-SA				0.12	2.25 lbf (10 N)	-	6	0.28 -0.04	-	0.16 ±0.02	-	0.10 ±0.02	-	0.02	715.1-3
	715-3-6-10-KA			0.12	-	2.25 lbf (10 N)	6	0.28 -0.04	-	0.16 ±0.02	-	0.10 ±0.02	-	0.02	715.1-3
		715-3-6-10-SB		0.12	2.25 lbf (10 N)	-	6	-	0.30 -0.08	-	0.16	-	0.10	0.02	715.1-3
			715-3-6-10-KB	0.12	-	2.25 lbf (10 N)	6	-	0.30 -0.08	-	0.16	-	0.10	0.02	715.1-3
715-3-6-20-SA				0.12	4.50 lbf (20 N)	-	6	0.28 -0.04	-	0.16 ±0.02	-	0.10 ±0.02	-	0.02	715.1-3
		715-3-6-20-SB		0.12	4.50 lbf (20 N)	-	6	-	0.30 -0.08	-	0.16	-	0.10	0.02	715.1-3
715-3-6-40-SA				0.12	8.99 lbf (40 N)	-	6	0.28 -0.04	-	0.16 ±0.02	-	0.10 ±0.02	-	0.02	715.1-3
		715-3-6-40-SB		0.12	8.99 lbf (40 N)	-	6	-	0.30 -0.08	-	0.16	-	0.10	0.02	715.1-3
715-5-10-20-SA				0.20	4.50 lbf (20 N)	-	10	0.43 -0.04	-	0.26 ±0.02	-	0.17 ±0.02	-	0.03	715.1-5.6
	715-5-10-20-KA			0.20	-	4.50 lbf (20 N)	10	0.43 -0.04	-	0.26 ±0.02	-	0.17 ±0.02	-	0.03	715.1-5.6
		715-5-10-20-SB		0.20	4.50 lbf (20 N)	-	10	-	0.47 -0.08	-	0.25	-	0.15	0.03	715.1-5.6
			715-5-10-20-KB	0.20	-	4.50 lbf (20 N)	10	-	0.47 -0.08	-	0.25	-	0.15	0.03	715.1-5.6
715-5-10-50-SA				0.20	11.24 lbf (50 N)	-	10	0.43 -0.04	-	0.26 ±0.02	-	0.17 ±0.02	-	0.03	715.1-5.6
		715-5-10-50-SB		0.20	11.24 lbf (50 N)	-	10	-	0.47 -0.08	-	0.25	-	0.15	0.03	715.1-5.6
715-5-10-100-SA				0.20	22.48 lbf (100 N)	-	10	0.43 -0.04	-	0.26 ±0.02	-	0.17 ±0.02	-	0.03	715.1-5.6
		715-5-10-100-SB		0.20	22.48 lbf (100 N)	-	10	-	0.47 -0.08	-	0.25	-	0.15	0.03	715.1-5.6
715-6-10-40-SA				0.24	8.99 lbf (40 N)	-	10	0.43 -0.04	-	0.42 ±0.02	-	0.30 ±0.02	-	0.04	715.1-5.6
	715-6-10-40-KA			0.24	-	8.99 lbf (40 N)	10	0.43 -0.04	-	0.42 ±0.02	-	0.30 ±0.02	-	0.04	715.1-5.6
		715-6-10-40-SB		0.24	8.99 lbf (40 N)	-	10	-	0.47 -0.08	-	0.41	-	0.29	0.04	715.1-5.6
			715-6-10-40-KB	0.24	-	8.99 lbf (40 N)	10	-	0.47 -0.08	-	0.41	-	0.29	0.04	715.1-5.6
715-6-10-75-SA				0.24	16.86 lbf (75 N)	-	10	0.43 -0.04	-	0.42 ±0.02	-	0.30 ±0.02	-	0.04	715.1-5.6
		715-6-10-75-SB		0.24	16.86 lbf (75 N)	-	10	-	0.47 -0.08	-	0.41	-	0.29	0.04	715.1-5.6
715-6-10-100-SA				0.24	22.48 lbf (100 N)	-	10	0.43 -0.04	-	0.42 ±0.02	-	0.30 ±0.02	-	0.04	715.1-5.6
		715-6-10-100-SB		0.24	22.48 lbf (100 N)	-	10	-	0.47 -0.08	-	0.41	-	0.29	0.04	715.1-5.6
715-8-12-50-SA				0.31	11.24 lbf (50 N)	-	12	0.53 -0.04	-	0.54 ±0.02	-	0.38 ±0.02	-	0.05	715.1-8
	715-8-12-50-KA			0.31	-	11.24 lbf (50 N)	12	0.53 -0.04	-	0.54 ±0.02	-	0.38 ±0.02	-	0.05	715.1-8
		715-8-12-50-SB		0.31	11.24 lbf (50 N)	-	12	-	0.57 -0.08	-	0.52	-	0.36	0.05	715.1-8
			715-8-12-50-KB	0.31	-	11.24 lbf (50 N)	12	-	0.57 -0.08	-	0.52	-	0.36	0.05	715.1-8
715-8-12-100-SA				0.31	22.48 lbf (100 N)	-	12	0.53 -0.04	-	0.54 ±0.02	-	0.38 ±0.02	-	0.05	715.1-8
		715-8-12-100-SB		0.31	22.48 lbf (100 N)	-	12	-	0.57 -0.08	-	0.52	-	0.36	0.05	715.1-8
715-8-12-150-SA				0.31	33.72 lbf (150 N)	-	12	0.53 -0.04	-	0.54 ±0.02	-	0.38 ±0.02	-	0.05	715.1-8
		715-8-12-150-SB		0.31	33.72 lbf (150 N)	-	12	-	0.57 -0.08	-	0.52	-	0.36	0.05	715.1-8
715-10-16-100-SA				0.39	22.48 lbf (100 N)	-	16	0.71 -0.04	-	0.66 ±0.02	-	0.46 ±0.02	-	0.06	715.1-10
	715-10-16-100-KA			0.39	-	22.48 lbf (100 N)	16	0.71 -0.04	-	0.66 ±0.02	-	0.46 ±0.02	-	0.06	715.1-10
		715-10-16-100-SB		0.39	22.48 lbf (100 N)	-	16	-	0.73 -0.08	-	0.65	-	0.45	0.06	715.1-10
			715-10-16-100-KB	0.39	-	22.48 lbf (100 N)	16	-	0.73 -0.08	-	0.65	-	0.45	0.06	715.1-10
715-10-16-150-SA				0.39	33.72 lbf (150 N)	-	16	0.71 -0.04	-	0.66 ±0.02	-	0.46 ±0.02	-	0.06	715.1-10
		715-10-16-150-SB		0.39	33.72 lbf (150 N)	-	16	-	0.73 -0.08	-	0.65	-	0.45	0.06	715.1-10
715-10-16-205-SA				0.39	46.09 lbf (205 N)	-	16	0.71 -0.04	-	0.66 ±0.02	-	0.46 ±0.02	-	0.06	715.1-10
		715-10-16-205-SB		0.39	46.09 lbf (205 N)	-	16	-	0.73 -0.08	-	0.65	-	0.45	0.06	715.1-10

Show / Hide columns

Inch

Dimensions in: Inch (change to Metric)

d₁	Side thrust force F Type SA / SB			Type KA / KB	d₂	l₁ -0.04 Type SA / KA	l₁ -0.08 Type SB / KB	l₂ ±0.02 Type SA / KA	Type SB / KB	l₃ ±0.02 Type SA / KA	Type SB / KB	w	Part number installation tool

0.12	2.25 lbf (10 N)	4.50 lbf (20 N)	8.99 lbf (40 N)	2.25 lbf (10 N)	1/4	0.28	0.30	0.16	0.16	0.10	0.10	0.02	GN 715.1-3
0.20	4.50 lbf (20 N)	11.24 lbf (50 N)	22.48 lbf (100 N)	4.50 lbf (20 N)	7/16	0.43	0.47	0.26	0.25	0.17	0.15	0.03	GN 715.1-5.6
0.24	8.99 lbf (40 N)	16.86 lbf (75 N)	22.48 lbf (100 N)	8.99 lbf (40 N)	7/16	0.43	0.47	0.42	0.41	0.30	0.29	0.04	GN 715.1-5.6
0.31	11.24 lbf (50 N)	22.48 lbf (100 N)	33.72 lbf (150 N)	11.24 lbf (50 N)	1/2	0.53	0.57	0.54	0.52	0.38	0.36	0.05	GN 715.1-8
0.39	22.48 lbf (100 N)	33.72 lbf (150 N)	46.09 lbf (205 N)	22.48 lbf (100 N)	5/8	0.71	0.73	0.66	0.65	0.46	0.45	0.06	GN 715.1-10

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

d₁	Side thrust force F Type SA / SB			Type KA / KB	d₂	l₁ -0.04 Type SA / KA	l₁ -0.08 Type SB / KB	l₂ ±0.02 Type SA / KA	Type SB / KB	l₃ ±0.02 Type SA / KA	Type SB / KB	w	Part number installation tool

0.12	2.25 lbf (10 N)	4.50 lbf (20 N)	8.99 lbf (40 N)	2.25 lbf (10 N)	6	0.28	0.30	0.16	0.16	0.10	0.10	0.02	GN 715.1-3
0.20	4.50 lbf (20 N)	11.24 lbf (50 N)	22.48 lbf (100 N)	4.50 lbf (20 N)	10	0.43	0.47	0.26	0.25	0.17	0.15	0.03	GN 715.1-5.6
0.24	8.99 lbf (40 N)	16.86 lbf (75 N)	22.48 lbf (100 N)	8.99 lbf (40 N)	10	0.43	0.47	0.42	0.41	0.30	0.29	0.04	GN 715.1-5.6
0.31	11.24 lbf (50 N)	22.48 lbf (100 N)	33.72 lbf (150 N)	11.24 lbf (50 N)	12	0.53	0.57	0.54	0.52	0.38	0.36	0.05	GN 715.1-8
0.39	22.48 lbf (100 N)	33.72 lbf (150 N)	46.09 lbf (205 N)	22.48 lbf (100 N)	16	0.71	0.73	0.66	0.65	0.46	0.45	0.06	GN 715.1-10

Build & Price

Technical and Assembly Instructions


				The position of the mounting hole results from the workpiece length l_m plus the hole offset m, which is calculated as shown below: w = Maximum movement range of the thrust pin t = Workpiece height m = Hole offset
				Case 1: The workpiece height t is greater than the cone height l₃ `m = d~1~/2 - w/2` Case 2: The workpiece height t is smaller than the cone height l₃ `m = d~1~/2 - (l~3~ - t) x 0.123`
If the position of the mounting hole is determined as specified, the full movement of the side thrust pin will be available to cover the tolerance of the workpiece. In case 1, the lateral clamping force is coupled with a downward pull that presses the workpiece against the contact surface.

The use of a mounting tool GN 715.1 or mounting tool GN 713.1 is recommended for installation. Eccentric bushings GN 715.2 are an assembly aid for side thrust pins GN 714 / GN 715. They enable adjustment of the side thrust pins to the most favorable clamping position, e.g. to bridge larger tolerance ranges of a workpiece.

Selected Part

Part Number

Total (net)

Mex$124.80

In Stock: 73

In Stock

Quantity

Create Project List

Save as Favorites

Please note our quantity discounts (Mexican Pesos).

Min	Max	Price
1	49	Mex$174.72
50	99	Mex$160.16
100	249	Mex$145.60
≥ 250		Mex$131.04

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.001 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021

CAD Download

Other Data Formats

About CAD Downloads

Need Help?

Our service team is available from Monday to Friday between 8:00 AM and 6:00 PM Central Time: +52(81)2721-4021

Special Requests | Contact our sales team

JW Winco Services

Request Callback

JW Winco Handbook

Your Contact

GN 715 Press-Fit Side Thrust Pins Housing Aluminum, Thrust Pin Steel / Plastic