Long Stroke Spring Plungers GN 611

Type: L - Steel, standard spring load

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

PFB / PRB Thread Locking Stainless Steel Characteristics

Product description

Long stroke spring plungers GN 611 are used as ejectors, for push-on / push-off applications in the sheet metal industry, as well as for cushioners.

The slot on the nose pin side is provided for blind hole applications. A special mounting tool GN 611.5 is available (see table).

Specification

Type L / LS

Housing
Steel, blackened finish
Nose pin
Steel, blackened finish
Case-hardened

Type LN / LSN

Housing
Stainless steel AISI 303
Nose pin
Stainless steel AISI 303
Nitrided

Spring
Steel

Identification of Type LS / LSN
Housing with 2 longitudinal markings

RoHS

Accessory

Installation Tools GN 611.5 (Part no. See Table)

Selected Part

Part Number	d₁	w Compression	d₂	d₃	l₁	l₂	A/F Internal hex in mm	Spring load ≈ Standard (Type L / LN) Initial	End	High (Type LS / LSN) Initial	End	Part number installation tool

611-M10-8-L	M 10	0.31	0.16	0.31	1.38	0.98	3	1.35 lbf (6 N)	3.60 lbf (16 N)	-	-	611.5-M10
611-M12-10-L	M 12	0.39	0.22	0.37	1.69	1.38	4	0.90 lbf (4 N)	4.05 lbf (18 N)	-	-	611.5-M12
611-M16-10-L	M 16	0.39	0.31	0.53	1.89	1.38	6	1.57 lbf (7 N)	5.40 lbf (24 N)	-	-	611.5-M16
611-M16-15-L	M 16	0.59	0.31	0.53	2.28	1.38	6	2.02 lbf (9 N)	7.42 lbf (33 N)	-	-	611.5-M16
611-M16-20-L	M 16	0.79	0.31	0.53	2.28	1.38	6	0.90 lbf (4 N)	5.17 lbf (23 N)	-	-	611.5-M16
611-M16-25-L	M 16	0.98	0.31	0.53	3.86	1.38	6	2.92 lbf (13 N)	9.22 lbf (41 N)	-	-	611.5-M16
611-M16-30-L	M 16	1.18	0.31	0.53	3.86	1.38	6	2.92 lbf (13 N)	10.57 lbf (47 N)	-	-	611.5-M16
611-M16-40-L	M 16	1.57	0.31	0.53	5.83	1.38	6	2.92 lbf (13 N)	14.16 lbf (63 N)	-	-	611.5-M16
611-M16-50-L	M 16	1.97	0.31	0.53	5.83	1.38	6	1.57 lbf (7 N)	9.67 lbf (43 N)	-	-	611.5-M16
611-M24-15-L	M 24	0.59	0.39	0.77	2.36	1.77	8	3.15 lbf (14 N)	19.56 lbf (87 N)	-	-	611.5-M24

Part Number	d₁	w Compression	d₂	d₃	l₁	l₂	A/F Internal hex in mm	Spring load ≈ Standard (Type L / LN) Initial	End	High (Type LS / LSN) Initial	End	Part number installation tool

611-M10-8-LS	M 10	0.31	0.16	0.31	1.38	0.98	3	-	-	2.70 lbf (12 N)	4.95 lbf (22 N)	611.5-M10
611-M12-10-LS	M 12	0.39	0.22	0.37	1.69	1.38	4	-	-	1.57 lbf (7 N)	10.34 lbf (46 N)	611.5-M12
611-M16-10-LS	M 16	0.39	0.31	0.53	1.89	1.38	6	-	-	2.25 lbf (10 N)	9.67 lbf (43 N)	611.5-M16
611-M16-15-LS	M 16	0.59	0.31	0.53	2.28	1.38	6	-	-	2.25 lbf (10 N)	12.81 lbf (57 N)	611.5-M16
611-M16-20-LS	M 16	0.79	0.31	0.53	3.27	1.38	6	-	-	4.05 lbf (18 N)	16.19 lbf (72 N)	611.5-M16
611-M16-25-LS	M 16	0.98	0.31	0.53	3.86	1.38	6	-	-	4.50 lbf (20 N)	15.74 lbf (70 N)	611.5-M16
611-M16-30-LS	M 16	1.18	0.31	0.53	3.86	1.38	6	-	-	4.50 lbf (20 N)	17.98 lbf (80 N)	611.5-M16
611-M16-40-LS	M 16	1.57	0.31	0.53	5.83	1.38	6	-	-	4.72 lbf (21 N)	25.40 lbf (113 N)	611.5-M16
611-M16-50-LS	M 16	1.97	0.31	0.53	5.83	1.38	6	-	-	2.92 lbf (13 N)	16.86 lbf (75 N)	611.5-M16
611-M24-15-LS	M 24	0.59	0.39	0.77	2.36	1.77	8	-	-	8.99 lbf (40 N)	43.16 lbf (192 N)	611.5-M24

Part Number	d₁	w Compression	d₂	d₃	l₁	l₂	A/F Internal hex in mm	Spring load ≈ Standard (Type L / LN) Initial	End	High (Type LS / LSN) Initial	End	Part number installation tool

611-M10-8-LN	M 10	0.31	0.16	0.31	1.38	0.98	3	1.35 lbf (6 N)	3.60 lbf (16 N)	-	-	611.5-M10
611-M12-10-LN	M 12	0.39	0.22	0.37	1.69	1.38	4	0.90 lbf (4 N)	4.05 lbf (18 N)	-	-	611.5-M12
611-M16-10-LN	M 16	0.39	0.31	0.53	1.89	1.38	6	1.57 lbf (7 N)	5.40 lbf (24 N)	-	-	611.5-M16
611-M16-15-LN	M 16	0.59	0.31	0.53	2.28	1.38	6	2.02 lbf (9 N)	7.42 lbf (33 N)	-	-	611.5-M16
611-M16-20-LN	M 16	0.79	0.31	0.53	2.28	1.38	6	0.90 lbf (4 N)	5.17 lbf (23 N)	-	-	611.5-M16
611-M16-25-LN	M 16	0.98	0.31	0.53	3.86	1.38	6	2.92 lbf (13 N)	9.22 lbf (41 N)	-	-	611.5-M16
611-M16-30-LN	M 16	1.18	0.31	0.53	3.86	1.38	6	2.92 lbf (13 N)	10.57 lbf (47 N)	-	-	611.5-M16
611-M16-40-LN	M 16	1.57	0.31	0.53	5.83	1.38	6	2.92 lbf (13 N)	14.16 lbf (63 N)	-	-	611.5-M16
611-M16-50-LN	M 16	1.97	0.31	0.53	5.83	1.38	6	1.57 lbf (7 N)	9.67 lbf (43 N)	-	-	611.5-M16
611-M24-15-LN	M 24	0.59	0.39	0.77	2.36	1.77	8	3.15 lbf (14 N)	19.56 lbf (87 N)	-	-	611.5-M24

Part Number	d₁	w Compression	d₂	d₃	l₁	l₂	A/F Internal hex in mm	Spring load ≈ Standard (Type L / LN) Initial	End	High (Type LS / LSN) Initial	End	Part number installation tool

611-M10-8-LSN	M 10	0.31	0.16	0.31	1.38	0.98	3	-	-	2.70 lbf (12 N)	4.95 lbf (22 N)	611.5-M10
611-M12-10-LSN	M 12	0.39	0.22	0.37	1.69	1.38	4	-	-	1.57 lbf (7 N)	10.34 lbf (46 N)	611.5-M12
611-M16-10-LSN	M 16	0.39	0.31	0.53	1.89	1.38	6	-	-	2.25 lbf (10 N)	9.67 lbf (43 N)	611.5-M16
611-M16-15-LSN	M 16	0.59	0.31	0.53	2.28	1.38	6	-	-	2.25 lbf (10 N)	12.81 lbf (57 N)	611.5-M16
611-M16-20-LSN	M 16	0.79	0.31	0.53	3.27	1.38	6	-	-	4.05 lbf (18 N)	16.19 lbf (72 N)	611.5-M16
611-M16-25-LSN	M 16	0.98	0.31	0.53	3.86	1.38	6	-	-	4.50 lbf (20 N)	15.74 lbf (70 N)	611.5-M16
611-M16-30-LSN	M 16	1.18	0.31	0.53	3.86	1.38	6	-	-	4.50 lbf (20 N)	17.98 lbf (80 N)	611.5-M16
611-M16-40-LSN	M 16	1.57	0.31	0.53	5.83	1.38	6	-	-	4.72 lbf (21 N)	25.40 lbf (113 N)	611.5-M16
611-M16-50-LSN	M 16	1.97	0.31	0.53	5.83	1.38	6	-	-	2.92 lbf (13 N)	16.86 lbf (75 N)	611.5-M16
611-M24-15-LSN	M 24	0.59	0.39	0.77	2.36	1.77	8	-	-	8.99 lbf (40 N)	43.16 lbf (192 N)	611.5-M24

d₁	w Compression	d₂	d₃	l₁	l₂	A/F Internal hex in mm	Spring load ≈ Standard (Type L / LN) Initial	End	High (Type LS / LSN) Initial	End	Part number installation tool

M 10	0.31	0.16	0.31	1.38	0.98	3	1.35 lbf (6 N)	3.60 lbf (16 N)	2.70 lbf (12 N)	4.95 lbf (22 N)	611.5-M10
M 12	0.39	0.22	0.37	1.69	1.38	4	0.90 lbf (4 N)	4.05 lbf (18 N)	1.57 lbf (7 N)	10.34 lbf (46 N)	611.5-M12
M 16	0.39	0.31	0.53	1.89	1.38	6	1.57 lbf (7 N)	5.40 lbf (24 N)	2.25 lbf (10 N)	9.67 lbf (43 N)	611.5-M16
M 16	0.59	0.31	0.53	2.28	1.38	6	2.02 lbf (9 N)	7.42 lbf (33 N)	2.25 lbf (10 N)	12.81 lbf (57 N)	611.5-M16
M 16	0.79	0.31	0.53	2.28	1.38	6	0.90 lbf (4 N)	5.17 lbf (23 N)	-	-	611.5-M16
M 16	0.79	0.31	0.53	3.27	1.38	6	-	-	4.05 lbf (18 N)	16.19 lbf (72 N)	611.5-M16
M 16	0.98	0.31	0.53	3.86	1.38	6	2.92 lbf (13 N)	9.22 lbf (41 N)	4.50 lbf (20 N)	15.74 lbf (70 N)	611.5-M16
M 16	1.18	0.31	0.53	3.86	1.38	6	2.92 lbf (13 N)	10.57 lbf (47 N)	4.50 lbf (20 N)	17.98 lbf (80 N)	611.5-M16
M 16	1.57	0.31	0.53	5.83	1.38	6	2.92 lbf (13 N)	14.16 lbf (63 N)	4.72 lbf (21 N)	25.40 lbf (113 N)	611.5-M16
M 16	1.97	0.31	0.53	5.83	1.38	6	1.57 lbf (7 N)	9.67 lbf (43 N)	2.92 lbf (13 N)	16.86 lbf (75 N)	611.5-M16
M 24	0.59	0.39	0.77	2.36	1.77	8	3.15 lbf (14 N)	19.56 lbf (87 N)	8.99 lbf (40 N)	43.16 lbf (192 N)	611.5-M24

Part Number

Total (net)

Mex$1,032.60

Available within 2 weeks

Quantity

Create Project List

Save as Favorites

Please note our quantity discounts (Mexican Pesos).

Min	Max	Price
1	99	Mex$1,032.60
100	249	Mex$946.55
250	499	Mex$860.50
≥ 500		Mex$774.45

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.022 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021