Axial Ball Joints GN 71802.1

Material: ST - Steel

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Standard Sheet GN 71802.1 Print This Page ISO Fundamental Tolerances Stainless Steel Characteristics

Product description

Axial ball joints GN 71802.1 are used in linear drives and lifting systems, for example, to transmit compressive forces in the axial direction, thereby compensating for angular offsets. They consist of a ball shank DIN 71803 and an axial ball socket.

A snap ring holds the axial ball joint together under tension up to the specified minimum pull-off force. This force must be overcome for assembly and disassembly.

To protect the axial ball joints from dirt and to keep lubricating grease in the joint, dust caps GN 710 are available as an accessory. The hex nut is included in the scope of delivery.

Specification

Ball socket / Ball shank

SteelST
- Property class 4.6
- Zinc plated, colorless passivated finish
- Ball shank hardened
Stainless steel AISI 304NI
Plain finish
Ball seat greased

Hex nut DIN 934

Steel, zinc plated, colorless passivated finish for ST
Stainless steel for NI

RoHS

Accessory

Dust Caps GN 710

Your Contact

You are looking for a Winco partner near you? Please select the country.

Part Number ST - Steel	Part Number NI - Stainless steel	d₁ H9/h9	d₂	d₃	d₄	d₅	l₁ ±0.01	l₂ ±0.01	l₃ ±0.01	t min.	A/F	Min. pull-off force


71802.1-8-M5-C-ST	71802.1-8-M5-C-NI	0.31 H9/h9	M 5	M 5	0.31	0.50	0.40 ±0.01	0.87 ±0.01	0.35 ±0.01	0.39	0.28	6.74 lbf (30 N)
71802.1-10-M6-C-ST	71802.1-10-M6-C-NI	0.39 H9/h9	M 6	M 6	0.39	0.58	0.49 ±0.01	0.98 ±0.01	0.43 ±0.01	0.43	0.31	8.99 lbf (40 N)
71802.1-13-M8-C-ST	71802.1-13-M8-C-NI	0.51 H9/h9	M 8	M 8	0.51	0.76	0.65 ±0.01	1.18 ±0.01	0.51 ±0.01	0.55	0.43	13.49 lbf (60 N)
71802.1-16-M10-C-ST	71802.1-16-M10-C-NI	0.63 H9/h9	M 10	M 10	0.63	0.94	0.79 ±0.01	1.38 ±0.01	0.63 ±0.01	0.59	0.51	17.98 lbf (80 N)
71802.1-19-M14F-C-ST	71802.1-19-M14F-C-NI	0.75 H9/h9	M 14F = M 14 x 1.5	M 14F = M 14 x 1.5	0.87	1.18	1.10 ±0.01	1.77 ±0.01	0.79 ±0.01	0.83	0.63	22.48 lbf (100 N)

d₁ H9/h9	d₂	d₃	d₄	d₅	l₁ ±0.01	l₂ ±0.01	l₃ ±0.01	t min.	A/F	Min. pull-off force

0.31	M 5	M 5	0.31	0.50	0.40	0.87	0.35	0.39	0.28	6.74 lbf (30 N)
0.39	M 6	M 6	0.39	0.58	0.49	0.98	0.43	0.43	0.31	8.99 lbf (40 N)
0.51	M 8	M 8	0.51	0.76	0.65	1.18	0.51	0.55	0.43	13.49 lbf (60 N)
0.63	M 10	M 10	0.63	0.94	0.79	1.38	0.63	0.59	0.51	17.98 lbf (80 N)
0.75	M 14F = M 14 x 1.5	M 14F = M 14 x 1.5	0.87	1.18	1.10	1.77	0.79	0.83	0.63	22.48 lbf (100 N)