Solid Disk Safety Clutch Handwheels GN 321.6

Type: D - With revolving handle

Standard Sheet GN 321.6 Print This Page Operating Instruction for Safety Clutch Handwheels More Information on Safety Clutch Handwheels Keyways P9 DIN 6885-2 ISO Fundamental Tolerances

Product description

The polished wheel rim, light gray cover cap, and black plastic coated wheel body give these handwheels a very attractive appearance.
The cover cap protects the bearing from dust, while acting as a shield for the mounting components.

The wheel hub has an internal groove to keep the cover cap in place. The cap is pushed into position by hand and can be removed by prying at the relief point with a screwdriver.
Needle bearings are greased during assembly with ample grease for permanent lubrication.

No mounting hole in rim for handwheel without handle. Handle shipped loose; mounting of handle is required.

Specification

Body
Aluminum

Hub machined
Rim
- Turned
- Highly polished on all sides
- Radial and axial runout < 0.4 mm
Unmachined body
Powder coated
Black, textured finish

Needle bearing clutch
Steel

Hardened
Glide surfaces honed

Cover cap
Plastic, light gray

Revolving handle GN 598
Steel

Powder coated
Black, textured finish
Threaded spindle
Zinc plated, blue passivated finish

RoHS

Accessory

Countersunk Washers GN 184 (for Axial Fixing)

Selected Part

Part Number A - Without handle	Part Number D - With revolving handle	d₁	d₂ H7 Bore with keyway	d₃	d₄	d₅	d₆ max.	b	h	l₁	l₂	l₃	r	Ø Handle


12KZ97/A	12KZ97/D	5.51	K 12 H7	0.94	1.65	1.57	0.91	0.65	0.28	1.77	2.28	2.66	2.40	0.91
14KZ97/A	14KZ97/D	5.51	K 14 H7	0.94	1.65	1.57	0.91	0.65	0.28	1.77	2.28	2.66	2.40	0.91
16KZ97/A	16KZ97/D	5.51	K 16 H7	0.94	1.65	1.57	0.91	0.65	0.28	1.77	2.28	2.66	2.40	0.91
12KZ98/A	12KZ98/D	6.30	K 12 H7	0.94	1.65	1.57	0.91	0.71	0.28	1.77	2.28	3.25	2.80	1.02
14KZ98/A	14KZ98/D	6.30	K 14 H7	0.94	1.65	1.57	0.91	0.71	0.28	1.77	2.28	3.25	2.80	1.02
16KZ98/A	16KZ98/D	6.30	K 16 H7	0.94	1.65	1.57	0.91	0.71	0.28	1.77	2.28	3.25	2.80	1.02

d₁	d₂ H7 Bore with keyway	d₃	d₄	d₅	d₆ max.	b	h	l₁	l₂	l₃	r	Ø Handle

5.51	K 12	K 14	K 16	0.94	1.65	1.57	0.91	0.65	0.28	1.77	2.28	2.66	2.40	0.91
6.30	K 12	K 14	K 16	0.94	1.65	1.57	0.91	0.71	0.28	1.77	2.28	3.25	2.80	1.02

Part Number

Total (net)

Mex$6,142.80

Available within 2 weeks

Quantity

Create Project List

Save as Favorites

Please note our quantity discounts (Mexican Pesos).

Min	Max	Price
1	9	Mex$6,142.80
10	24	Mex$5,630.90
25	49	Mex$5,119.00
≥ 50		Mex$4,607.10

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 1.587 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021