Original design Domed gear lever knobs EN 719.1 satisfy by their form and ergonomical aspects. By using these knobs a threaded end on a lever is not required.
These knobs are mounted by using a plastic hammer to drive them over a shaft end which should preferably be slightly rounded or chamfered (30°).
The bushing is embedded during the manufacturing process and it does not need insertion before driving it over a shaft.
Handle
Plastic, Phenolic (PF)
Bushing
Polyamide (PA)
Embedded
RoHS
| d1 | d2 Bore | d3 | h | t |
|---|---|---|---|---|
| 0.59 | B 6 | 0.47 | 0.98 | 0.67 |
| 0.79 | B 8 | 0.55 | 1.22 | 0.83 |
| 1.02 | B 10 | 0.67 | 1.65 | 1.18 |
| 1.30 | B 10 | 0.79 | 2.13 | 1.46 |
| 1.30 | B 12 | 0.79 | 2.13 | 1.57 |
| 1.50 | B 14 | 0.91 | 2.68 | 1.97 |
| 1.61 | B 16 | 0.98 | 3.43 | 2.28 |
| Min | Max | Price |
|---|---|---|
| 1 | 9 | Mex$114.40 |
| 10 | 249 | Mex$110.24 |
| 250 | 499 | Mex$104.00 |
| ≥ 500 | Mex$93.60 |
Our service team is available from Monday to Friday between 8:00 AM and 6:00 PM Central Time: +52(81)2721-4021
