Guide Rollers GN 753.1

Type: KV - Convex
Identification no.: 1 - With bore

Product description

Guide rollers GN 753.1 can be used as guides, bearings or supports for small to medium loads. They can also be used to create custom linear guide rail systems.

The radial load capacity rating given in the table should be understood as a guide value at which the guide rollers achieve a lifetime performance of at least 656,167 ft (200,000 m). The conditions for achieving this lifetime performance are a speed of 1.3 ft/s (0.4 m/s), a clean, dry, level, smooth and hard surface to roll against and an operating temperature between 59 °F and 86 °F (15 °C and 30 °C). In general, the guide rollers should not be used under axial load.

Specification

Outer race
Plastic (Polyacetal POM)
Operating temperature:
-4 °F to 212 °F (-20 °C to 100 °C)

Ball bearing

Steel, 100Cr6, hardened
Covered (cover discs 2Z)

Stud
Steel, zinc plated

RoHS

Accessory

Mounting Accessories GN 753.2

Selected Part

Part Number 1 - With bore	Part Number 2 - Stud with external thread	Part Number 3 - Stud with internal thread	d₁ -0.008	d₂ -0.0008 Bore Identification no. 1	d₃ Thread Identification no. 2	d₄ Thread Identification no. 3	b₁ -0.008	b₂	d₅	d₆	l₁	l₂	l₃	r	A/F	t min.	Load capacity radial dynamic

753.1-22-B5-ZL-1			0.866 -0.008	B 5 -0.0008	-	-	0.276 -0.008	0.20	0.33	-	-	-	-	-	-	-	89.92 lbf (400 N)
	753.1-22-M5-ZL-2		0.866 -0.008	-	M 5	-	0.276 -0.008	0.20	0.33	0.35	0.04	0.30	-	-	T10	-	89.92 lbf (400 N)
		753.1-22-M4-ZL-3	0.866 -0.008	-	-	M 4	0.276 -0.008	0.20	0.33	0.35	-	-	0.35	-	T10	0.28	89.92 lbf (400 N)
753.1-25-B6-ZL-1			0.984 -0.008	B 6 -0.0008	-	-	0.315 -0.008	0.24	0.41	-	-	-	-	-	-	-	135 lbf (600 N)
	753.1-25-M5-ZL-2		0.984 -0.008	-	M 5	-	0.315 -0.008	0.24	0.41	0.39	0.04	0.30	-	-	T15	-	135 lbf (600 N)
		753.1-25-M4-ZL-3	0.984 -0.008	-	-	M 4	0.315 -0.008	0.24	0.41	0.39	-	-	0.35	-	T15	0.31	135 lbf (600 N)
753.1-30-B8-ZL-1			1.181 -0.008	B 8 -0.0008	-	-	0.394 -0.008	0.28	0.47	-	-	-	-	-	-	-	180 lbf (800 N)
	753.1-30-M6-ZL-2		1.181 -0.008	-	M 6	-	0.394 -0.008	0.28	0.47	0.47	0.06	0.35	-	-	T25	-	180 lbf (800 N)
		753.1-30-M5-ZL-3	1.181 -0.008	-	-	M 5	0.394 -0.008	0.28	0.47	0.47	-	-	0.35	-	T25	0.39	180 lbf (800 N)
753.1-35-B10-ZL-1			1.378 -0.008	B 10 -0.0008	-	-	0.394 -0.008	0.31	0.55	-	-	-	-	-	-	-	225 lbf (1000 N)
	753.1-35-M8-ZL-2		1.378 -0.008	-	M 8	-	0.394 -0.008	0.31	0.55	0.55	0.06	0.47	-	-	T30	-	225 lbf (1000 N)
		753.1-35-M6-ZL-3	1.378 -0.008	-	-	M 6	0.394 -0.008	0.31	0.55	0.55	-	-	0.47	-	T30	0.47	225 lbf (1000 N)
753.1-42-B10-ZL-1			1.654 -0.008	B 10 -0.0008	-	-	0.472 -0.008	0.35	0.67	-	-	-	-	-	-	-	270 lbf (1200 N)
	753.1-42-M8-ZL-2		1.654 -0.008	-	M 8	-	0.472 -0.008	0.35	0.67	0.55	0.06	0.47	-	-	T30	-	270 lbf (1200 N)
		753.1-42-M6-ZL-3	1.654 -0.008	-	-	M 6	0.472 -0.008	0.35	0.67	0.55	-	-	0.47	-	T30	0.47	270 lbf (1200 N)
753.1-50-B10-ZL-1			1.969 -0.008	B 10 -0.0008	-	-	0.551 -0.008	0.43	0.75	-	-	-	-	-	-	-	337 lbf (1500 N)
	753.1-50-M8-ZL-2		1.969 -0.008	-	M 8	-	0.551 -0.008	0.43	0.75	0.55	0.06	0.47	-	-	T30	-	337 lbf (1500 N)
		753.1-50-M6-ZL-3	1.969 -0.008	-	-	M 6	0.551 -0.008	0.43	0.75	0.55	-	-	0.47	-	T30	0.47	337 lbf (1500 N)

Part Number 1 - With bore	Part Number 2 - Stud with external thread	Part Number 3 - Stud with internal thread	d₁ -0.008	d₂ -0.0008 Bore Identification no. 1	d₃ Thread Identification no. 2	d₄ Thread Identification no. 3	b₁ -0.008	b₂	d₅	d₆	l₁	l₂	l₃	r	A/F	t min.	Load capacity radial dynamic

753.1-22-B5-KV-1			0.866 -0.008	B 5 -0.0008	-	-	0.276 -0.008	0.20	0.33	-	-	-	-	2.17	-	-	89.92 lbf (400 N)
	753.1-22-M5-KV-2		0.866 -0.008	-	M 5	-	0.276 -0.008	0.20	0.33	0.35	0.04	0.30	-	2.17	T10	-	89.92 lbf (400 N)
		753.1-22-M4-KV-3	0.866 -0.008	-	-	M 4	0.276 -0.008	0.20	0.33	0.35	-	-	0.35	2.17	T10	0.28	89.92 lbf (400 N)
753.1-25-B6-KV-1			0.984 -0.008	B 6 -0.0008	-	-	0.315 -0.008	0.24	0.41	-	-	-	-	2.56	-	-	135 lbf (600 N)
	753.1-25-M5-KV-2		0.984 -0.008	-	M 5	-	0.315 -0.008	0.24	0.41	0.39	0.04	0.30	-	2.56	T15	-	135 lbf (600 N)
		753.1-25-M4-KV-3	0.984 -0.008	-	-	M 4	0.315 -0.008	0.24	0.41	0.39	-	-	0.35	2.56	T15	0.31	135 lbf (600 N)
753.1-30-B8-KV-1			1.181 -0.008	B 8 -0.0008	-	-	0.394 -0.008	0.28	0.47	-	-	-	-	2.95	-	-	180 lbf (800 N)
	753.1-30-M6-KV-2		1.181 -0.008	-	M 6	-	0.394 -0.008	0.28	0.47	0.47	0.06	0.35	-	2.95	T25	-	180 lbf (800 N)
		753.1-30-M5-KV-3	1.181 -0.008	-	-	M 5	0.394 -0.008	0.28	0.47	0.47	-	-	0.35	2.95	T25	0.39	180 lbf (800 N)
753.1-35-B10-KV-1			1.378 -0.008	B 10 -0.0008	-	-	0.394 -0.008	0.31	0.55	-	-	-	-	3.54	-	-	225 lbf (1000 N)
	753.1-35-M8-KV-2		1.378 -0.008	-	M 8	-	0.394 -0.008	0.31	0.55	0.55	0.06	0.47	-	3.54	T30	-	225 lbf (1000 N)
		753.1-35-M6-KV-3	1.378 -0.008	-	-	M 6	0.394 -0.008	0.31	0.55	0.55	-	-	0.47	3.54	T30	0.47	225 lbf (1000 N)
753.1-42-B10-KV-1			1.654 -0.008	B 10 -0.0008	-	-	0.472 -0.008	0.35	0.67	-	-	-	-	4.13	-	-	270 lbf (1200 N)
	753.1-42-M8-KV-2		1.654 -0.008	-	M 8	-	0.472 -0.008	0.35	0.67	0.55	0.06	0.47	-	4.13	T30	-	270 lbf (1200 N)
		753.1-42-M6-KV-3	1.654 -0.008	-	-	M 6	0.472 -0.008	0.35	0.67	0.55	-	-	0.47	4.13	T30	0.47	270 lbf (1200 N)
753.1-50-B10-KV-1			1.969 -0.008	B 10 -0.0008	-	-	0.551 -0.008	0.43	0.75	-	-	-	-	4.92	-	-	337 lbf (1500 N)
	753.1-50-M8-KV-2		1.969 -0.008	-	M 8	-	0.551 -0.008	0.43	0.75	0.55	0.06	0.47	-	4.92	T30	-	337 lbf (1500 N)
		753.1-50-M6-KV-3	1.969 -0.008	-	-	M 6	0.551 -0.008	0.43	0.75	0.55	-	-	0.47	4.92	T30	0.47	337 lbf (1500 N)

d₁ -0.008	d₂ -0.0008 Bore Identification no. 1	d₃ Thread Identification no. 2	d₄ Thread Identification no. 3	b₁ -0.008	b₂	d₅	d₆	l₁	l₂	l₃	r	A/F	t min.	Load capacity radial dynamic

0.866	B 5	M 5	M 4	0.276	0.20	0.33	0.35	0.04	0.30	0.35	2.17	T10	0.28	89.92 lbf (400 N)
0.984	B 6	M 5	M 4	0.315	0.24	0.41	0.39	0.04	0.30	0.35	2.56	T15	0.31	135 lbf (600 N)
1.181	B 8	M 6	M 5	0.394	0.28	0.47	0.47	0.06	0.35	0.35	2.95	T25	0.39	180 lbf (800 N)
1.378	B 10	M 8	M 6	0.394	0.31	0.55	0.55	0.06	0.47	0.47	3.54	T30	0.47	225 lbf (1000 N)
1.654	B 10	M 8	M 6	0.472	0.35	0.67	0.55	0.06	0.47	0.47	4.13	T30	0.47	270 lbf (1200 N)
1.969	B 10	M 8	M 6	0.551	0.43	0.75	0.55	0.06	0.47	0.47	4.92	T30	0.47	337 lbf (1500 N)

Part Number

Price

Call / Email for Price & Availability

Available within 2 weeks

Quantity

Create Project List

Save as Favorites

Please note our quantity discounts (Mexican Pesos).

No price breaks available.

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.013 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: +52(81)2721-4021