NO.797 Rhombus T-Slot Bolts Steel

Product description

Rhombus T-slot bolts NO.797 are unique due to the fact that they can be inserted into the T-slot groove from the side or from above at any point in the groove.

This can also be a critical and useful element when a fixture is already set up and it is realized that an additional clamping point is required due to the fixture's size, weight, etc.

Note: Rhombus T-slot bolts have lower load capacities compared to comparable sizes of T-nuts DIN 508, due to the reduced bearing contact surfaces.

Specification

Heat-treatable steel

Property class 8.8
Forged
Milled T-slot guide face

RoHS

NO.797 Steel Rhombus T-Slot Bolts sketch

Hide technical drawing

Part Options / Table

Part Number	T-slot width	d	Length l	a	b	e	k

12N50SPK	0.55	M 12	1.97	0.54	1.38	0.87	0.31
12N80SPK	0.55	M 12	3.15	0.54	2.17	0.87	0.31
12N125SPK	0.55	M 12	4.92	0.54	2.95	0.87	0.31
16N63SPL	0.71	M 16	2.48	0.70	1.77	1.10	0.39
16N100SPL	0.71	M 16	3.94	0.70	2.56	1.10	0.39
16N160SPL	0.71	M 16	6.30	0.70	3.94	1.10	0.39
20N80SPM	0.87	M 20	3.15	0.85	2.17	1.38	0.55
20N125SPM	0.87	M 20	4.92	0.85	3.35	1.38	0.55
20N200SPN	0.87	M 20	7.87	0.85	4.72	1.38	0.55
24N125SPN	1.10	M 24	4.92	1.09	3.35	1.73	0.71
24N250SPN	1.10	M 24	9.84	1.09	5.91	1.73	0.71

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

T-slot width	d	Length l	a	b	e	k

0.55	M 12	1.97	0.54	1.38	0.87	0.31
0.55	M 12	3.15	0.54	2.17	0.87	0.31
0.55	M 12	4.92	0.54	2.95	0.87	0.31
0.71	M 16	2.48	0.70	1.77	1.10	0.39
0.71	M 16	3.94	0.70	2.56	1.10	0.39
0.71	M 16	6.30	0.70	3.94	1.10	0.39
0.87	M 20	3.15	0.85	2.17	1.38	0.55
0.87	M 20	4.92	0.85	3.35	1.38	0.55
0.87	M 20	7.87	0.85	4.72	1.38	0.55
1.10	M 24	4.92	1.09	3.35	1.73	0.71
1.10	M 24	9.84	1.09	5.91	1.73	0.71