Indexing Plungers EN 617.2

ELESA original design

code: PMT.100

Type: B - Non lock-out, without lock nut
Material: ST - Steel

List of Indexing Plunger Types Plastic Characteristics Metric ISO Fine Threads DIN 13

Product description

Indexing plungers EN 617.2 with plastic body are a reasonably priced indexing plunger variation. The dimensions correspond to those of indexing plungers GN 617 or GN 617.1.

Lock-out types C / CK are used for applications where the plunger pin needs to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notch keeps the plunger in the retracted position.

Specification

Threaded body
Plastic
Technopolymer (Polyamide PA-HP)
- Glass fiber reinforced
- Temperature resistant up to 266 °F (130 °C)
- Black, matte finish

Plunger pin
SteelST
- Hardened
- Blackened finish

Spring
Stainless steel AISI 302

Knob
Plastic
Technopolymer (Polyamide PA)
- Temperature resistant up to 266 °F (130 °C)
- Red, RAL 3000, matte finishRT
- Not removable

Lock nut
Plastic
Technopolymer (Polyamide PA-HP)
Black, matte finish

RoHS

Your Contact

You are looking for a Winco partner near you?

Part Number	d₁ Pin -0.004/-0.006 Bore -0.003	d₂	d₃	e ≈	l₁ ≈	l₂ Type B / BK	Type C / CK	l₃	l₄	l₅ ≈	s	A/F₁	A/F₂	Max. tightening torque in Nm	Spring load ≈ Initial	End

617.2-5-3/8X24-B-ST-RT	0.197 -0.004/-0.006 / -0.003	3/8 x 24	0.83	0.54	1.77	0.20	0.20	0.67	0.20	2.01	0.28	0.47	0.63	8	1.57 lbf (7 N)	3.82 lbf (17 N)
617.2-6-1/2X20-B-ST-RT	0.236 -0.004/-0.006 / -0.003	1/2 x 20	0.98	0.63	2.13	0.24	0.24	0.79	0.24	2.40	0.31	0.55	0.75	12	2.02 lbf (9 N)	5.40 lbf (24 N)
617.2-8-5/8X18-B-ST-RT	0.315 -0.004/-0.006 / -0.003	5/8 x 18	1.22	0.85	2.72	0.31	0.28	1.02	0.31	2.99	0.39	0.75	0.94	18	2.47 lbf (11 N)	6.74 lbf (30 N)
617.2-5-M10X1-B-ST-RT	0.197 -0.004/-0.006 / -0.003	M 10 x 1	0.83	0.54	1.77	0.20	0.20	0.67	0.20	2.01	0.28	0.47	0.63	8	1.57 lbf (7 N)	3.82 lbf (17 N)
617.2-6-M12X1.5-B-ST-RT	0.236 -0.004/-0.006 / -0.003	M 12 x 1.5	0.98	0.63	2.13	0.24	0.24	0.79	0.24	2.40	0.31	0.55	0.75	12	2.02 lbf (9 N)	5.40 lbf (24 N)
617.2-8-M16X1.5-B-ST-RT	0.315 -0.004/-0.006 / -0.003	M 16 x 1.5	1.22	0.85	2.72	0.31	0.28	1.02	0.31	2.99	0.39	0.75	0.94	18	2.47 lbf (11 N)	6.74 lbf (30 N)
617.2-10-M20X1.5-B-ST-RT	0.394 -0.004/-0.006 / -0.003	M 20 x 1.5	1.22	0.98	3.15	0.39	0.39	1.30	0.39	3.58	0.43	0.87	1.18	25	4.27 lbf (19 N)	10.12 lbf (45 N)

Part Number	d₁ Pin -0.004/-0.006 Bore -0.003	d₂	d₃	e ≈	l₁ ≈	l₂ Type B / BK	Type C / CK	l₃	l₄	l₅ ≈	s	A/F₁	A/F₂	Max. tightening torque in Nm	Spring load ≈ Initial	End

617.2-5-3/8X24-BK-ST-RT	0.197 -0.004/-0.006 / -0.003	3/8 x 24	0.83	0.54	1.77	0.20	0.20	0.67	0.20	2.01	0.28	0.47	0.63	8	1.57 lbf (7 N)	3.82 lbf (17 N)
617.2-6-1/2X20-BK-ST-RT	0.236 -0.004/-0.006 / -0.003	1/2 x 20	0.98	0.63	2.13	0.24	0.24	0.79	0.24	2.40	0.31	0.55	0.75	12	2.02 lbf (9 N)	5.40 lbf (24 N)
617.2-8-5/8X18-BK-ST-RT	0.315 -0.004/-0.006 / -0.003	5/8 x 18	1.22	0.85	2.72	0.31	0.28	1.02	0.31	2.99	0.39	0.75	0.94	18	2.47 lbf (11 N)	6.74 lbf (30 N)
617.2-5-M10X1-BK-ST-RT	0.197 -0.004/-0.006 / -0.003	M 10 x 1	0.83	0.54	1.77	0.20	0.20	0.67	0.20	2.01	0.28	0.47	0.63	8	1.57 lbf (7 N)	3.82 lbf (17 N)
617.2-6-M12X1.5-BK-ST-RT	0.236 -0.004/-0.006 / -0.003	M 12 x 1.5	0.98	0.63	2.13	0.24	0.24	0.79	0.24	2.40	0.31	0.55	0.75	12	2.02 lbf (9 N)	5.40 lbf (24 N)
617.2-8-M16X1.5-BK-ST-RT	0.315 -0.004/-0.006 / -0.003	M 16 x 1.5	1.22	0.85	2.72	0.31	0.28	1.02	0.31	2.99	0.39	0.75	0.94	18	2.47 lbf (11 N)	6.74 lbf (30 N)
617.2-10-M20X1.5-BK-ST-RT	0.394 -0.004/-0.006 / -0.003	M 20 x 1.5	1.22	0.98	3.15	0.39	0.39	1.30	0.39	3.58	0.43	0.87	1.18	25	4.27 lbf (19 N)	10.12 lbf (45 N)

Part Number	d₁ Pin -0.004/-0.006 Bore -0.003	d₂	d₃	e ≈	l₁ ≈	l₂ Type B / BK	Type C / CK	l₃	l₄	l₅ ≈	s	A/F₁	A/F₂	Max. tightening torque in Nm	Spring load ≈ Initial	End

617.2-5-3/8X24-C-ST-RT	0.197 -0.004/-0.006 / -0.003	3/8 x 24	0.83	0.54	1.77	0.20	0.20	0.67	0.20	2.01	0.28	0.47	0.63	8	1.57 lbf (7 N)	3.82 lbf (17 N)
617.2-6-1/2X20-C-ST-RT	0.236 -0.004/-0.006 / -0.003	1/2 x 20	0.98	0.63	2.13	0.24	0.24	0.79	0.24	2.40	0.31	0.55	0.75	12	2.02 lbf (9 N)	5.40 lbf (24 N)
617.2-8-5/8X18-C-ST-RT	0.315 -0.004/-0.006 / -0.003	5/8 x 18	1.22	0.85	2.72	0.31	0.28	1.02	0.31	2.99	0.39	0.75	0.94	18	2.47 lbf (11 N)	6.74 lbf (30 N)
617.2-5-M10X1-C-ST-RT	0.197 -0.004/-0.006 / -0.003	M 10 x 1	0.83	0.54	1.77	0.20	0.20	0.67	0.20	2.01	0.28	0.47	0.63	8	1.57 lbf (7 N)	3.82 lbf (17 N)
617.2-6-M12X1.5-C-ST-RT	0.236 -0.004/-0.006 / -0.003	M 12 x 1.5	0.98	0.63	2.13	0.24	0.24	0.79	0.24	2.40	0.31	0.55	0.75	12	2.02 lbf (9 N)	5.40 lbf (24 N)
617.2-8-M16X1.5-C-ST-RT	0.315 -0.004/-0.006 / -0.003	M 16 x 1.5	1.22	0.85	2.72	0.31	0.28	1.02	0.31	2.99	0.39	0.75	0.94	18	2.47 lbf (11 N)	6.74 lbf (30 N)
617.2-10-M20X1.5-C-ST-RT	0.394 -0.004/-0.006 / -0.003	M 20 x 1.5	1.22	0.98	3.15	0.39	0.39	1.30	0.39	3.58	0.43	0.87	1.18	25	4.27 lbf (19 N)	10.12 lbf (45 N)

Part Number	d₁ Pin -0.004/-0.006 Bore -0.003	d₂	d₃	e ≈	l₁ ≈	l₂ Type B / BK	Type C / CK	l₃	l₄	l₅ ≈	s	A/F₁	A/F₂	Max. tightening torque in Nm	Spring load ≈ Initial	End

617.2-5-3/8X24-CK-ST-RT	0.197 -0.004/-0.006 / -0.003	3/8 x 24	0.83	0.54	1.77	0.20	0.20	0.67	0.20	2.01	0.28	0.47	0.63	8	1.57 lbf (7 N)	3.82 lbf (17 N)
617.2-6-1/2X20-CK-ST-RT	0.236 -0.004/-0.006 / -0.003	1/2 x 20	0.98	0.63	2.13	0.24	0.24	0.79	0.24	2.40	0.31	0.55	0.75	12	2.02 lbf (9 N)	5.40 lbf (24 N)
617.2-8-5/8X18-CK-ST-RT	0.315 -0.004/-0.006 / -0.003	5/8 x 18	1.22	0.85	2.72	0.31	0.28	1.02	0.31	2.99	0.39	0.75	0.94	18	2.47 lbf (11 N)	6.74 lbf (30 N)
617.2-5-M10X1-CK-ST-RT	0.197 -0.004/-0.006 / -0.003	M 10 x 1	0.83	0.54	1.77	0.20	0.20	0.67	0.20	2.01	0.28	0.47	0.63	8	1.57 lbf (7 N)	3.82 lbf (17 N)
617.2-6-M12X1.5-CK-ST-RT	0.236 -0.004/-0.006 / -0.003	M 12 x 1.5	0.98	0.63	2.13	0.24	0.24	0.79	0.24	2.40	0.31	0.55	0.75	12	2.02 lbf (9 N)	5.40 lbf (24 N)
617.2-8-M16X1.5-CK-ST-RT	0.315 -0.004/-0.006 / -0.003	M 16 x 1.5	1.22	0.85	2.72	0.31	0.28	1.02	0.31	2.99	0.39	0.75	0.94	18	2.47 lbf (11 N)	6.74 lbf (30 N)
617.2-10-M20X1.5-CK-ST-RT	0.394 -0.004/-0.006 / -0.003	M 20 x 1.5	1.22	0.98	3.15	0.39	0.39	1.30	0.39	3.58	0.43	0.87	1.18	25	4.27 lbf (19 N)	10.12 lbf (45 N)

d₁ Pin -0.004/-0.006 Bore -0.003	d₂	d₃	e ≈	l₁ ≈	l₂ Type B / BK	Type C / CK	l₃	l₄	l₅ ≈	s	A/F₁	A/F₂	Max. tightening torque in Nm	Spring load ≈ Initial	End

0.197	3/8 x 24	0.83	0.54	1.77	0.20	0.20	0.67	0.20	2.01	0.28	0.47	0.63	8	1.57 lbf (7 N)	3.82 lbf (17 N)
0.236	1/2 x 20	0.98	0.63	2.13	0.24	0.24	0.79	0.24	2.40	0.31	0.55	0.75	12	2.02 lbf (9 N)	5.40 lbf (24 N)
0.315	5/8 x 18	1.22	0.85	2.72	0.31	0.28	1.02	0.31	2.99	0.39	0.75	0.94	18	2.47 lbf (11 N)	6.74 lbf (30 N)

d₁ Pin -0.004/-0.006 Bore -0.003	d₂	d₃	e ≈	l₁ ≈	l₂ Type B / BK	Type C / CK	l₃	l₄	l₅ ≈	s	A/F₁	A/F₂	Max. tightening torque in Nm	Spring load ≈ Initial	End

0.197	M 10 x 1	0.83	0.54	1.77	0.20	0.20	0.67	0.20	2.01	0.28	0.47	0.63	8	1.57 lbf (7 N)	3.82 lbf (17 N)
0.236	M 12 x 1.5	0.98	0.63	2.13	0.24	0.24	0.79	0.24	2.40	0.31	0.55	0.75	12	2.02 lbf (9 N)	5.40 lbf (24 N)
0.315	M 16 x 1.5	1.22	0.85	2.72	0.31	0.28	1.02	0.31	2.99	0.39	0.75	0.94	18	2.47 lbf (11 N)	6.74 lbf (30 N)
0.394	M 20 x 1.5	1.22	0.98	3.15	0.39	0.39	1.30	0.39	3.58	0.43	0.87	1.18	25	4.27 lbf (19 N)	10.12 lbf (45 N)